Electromagnetic Flowmeters
As they do not have internal moving parts, these meters are ideal for use with corrosive liquids, solids in suspension and in operating conditions requiring high pressures. They are quite common in the chemical, petrochemical, oil, paper and food industries but they have also been helpful in public service companies dealing with drinking water and all kinds of effluents.
For more information, clik on the image and download
"Electromagnetic flowmeters.pfd" (618 Kb).
Open-Flow / All-Pass Turbines: Very accurate and reliable for the measurement of liquids in multiple applications required by the food, chemical and oil industries. Water, fuels, food stuffs, solvents, saline solutions, alkalis and acids are measured successfully.
Insert Turbines: They were intended in several models for use in pipes from 1" to 24" where extreme accuracy might not be required. They are highly reliable and they can be removed and reinserted at any time without interrupting flow.
For more information, clik on the image and download "Turbine flowmeters for Liquids.pfd" (518 Kb).
Gas turbines are quite similar to liquid turbines. They measure gas fluids in multiple applications required by the food, chemical and oil industries. They are very helpful and economic equipment for the totalization of volumes of air, oxygen, natural gas, etc. They can satisfy a wide range of applications.
For more information on this products, mail us.
Equipment specialy designed to mesure viscous fluids with great accuracy and a long life. Based on oval gears, they are appropriate for mesuring viscous fluids and small volumes.This equipment, with only two moving parts, the oval gears, allows them to be installed in the most covinient position, without pre and post meter pipe sections.
The have small charge losses, and can be installed in gravity flow layouts. Their design uses the type 2500 electronic units, with of a great variety of capabilities with very good accuracy.
For more information on this products, mail us.
Specially designed to measure irrigation water, RT-3300-2A flowmeters are tangential turbine flowmeters which have an electronic unit capable of measuring flow while volumes are totalized. They are easy to mount on pipes of which size may vary from 2" to 10", and their operation is maintenance free and completely safe and reliable for many years.
For more information on this products, mail us.
Rotameters: For a wide range of applications, in gases or liquids, for small or large flows, and at low or high temperatures and pressures, rotameters are simple, economic, low cost and almost maintenance-free flowmeters. They come in plastic, glass, stainless steel or special alloys to meet specific customer needs.
Ejectors: They were designed to exhaust liquids or gases through a motive fluid. They can be manufactured in various materials compatible with specific applications on request.
Fittings: Minimum and maximum range alarm systems - either inductive or optical type, pressure regulators and flow displays complete our product line.
For more information, clik on the image and download "Rotameters.pfd" (680 Kb).
These equipment were designed to block the flow of particles of which size may damage or jam turbine flowmeters and obstruct the fixed restrictions metered passage of injection nozzles tips. They are recommended for use in oil secondary recovery facilities. Their cartridge-type filter unit can be removed for cleaning or replacement. Parts of filter units are kept in stock permanently. Stop-and-check valves are included in this product line.
For more information on this products, mail us.
By combining turbine or electromagnetic flowmeters with this ticket printer, you can have an ideal system for loading and unloading liquid volumes which have to be measured accurately and reliably when sold or bought.
For more information on this products, mail us.
